DOWEL PIN 70 to * - FL, FLH, FLH-80, Classic

DOWEL PIN, 70 to * - FL, FLH, FLH-80, Classic

PLUG, crankcase 70 to * - FL, FLH, FLH-80, Classic

PLUG, oil screen 70 to 80 - FL, FLH, FLH-80, Classic

SCREW, 1/4-20 x 1-1/4 Pozidriv fil. hd. 70 to Early 80 - FL, FLH, FLH-80, Classic

SCREW, 1/4-20 x 1 Pozidriv fil. hd. 70 to Early 80 - FL, FLH, FLH-80, Classic

SCREW, 1/4-20 x 1-3/4 Pozidriv fil. hd. N/A 70 to Early 80 - FL, FLH, FLH-80, Classic

SCREW, No. 8-32 X 1/2 Pozidrivflat ctsk. hd. (Grade 2 steel)

SCREW No. 10-24 X 1/2 TORX pan hd.

SCREW, No. 8-32 x 7/16 Pozidriv. hd. 72 to 79 - FL, FLH, FLH-80, Classic

SCREW, No. 8-32 x 7/16 ctsk. hd. 70 & 71 - FL, FLH

SCREW, 1/4-20 X 1-1/4 knurled socket hd. (w/lockpatch)

SCREW, 1/4-20 X 1-1/4 knurled socket hd. (w/lockpatch)

SCREW, 1/4-20 X 1-3/4 knurled socket hd. (Grade 8 steel)

SCREW, 1/4-20 X 1-3/8 knurled socket hd. (w/lockpatch)

SCREW, 1/4-20 X 1-1/8 knurled socket hd. (w/lockpatch)

WASHER, 1/4 X 7/16 X 1/16

WASHER, No. 8 X 7/16 X 3/64

WASHER, 1/4 X 5/8 X 1 /16

POP RIVET, 5/32 x 3/8 x 5/16 dia. hd. 80 to * - FL, FLH, FLH-80, Classic

NEEDLE BEARING crankcase cam cover

CLAMP, electronic ignition wire 80 & Early 81 - FL, FLH, FLH-80, Classic

CLAMP, electronic ignition wire Late 81 to * - FLH-80, Classic

RETAINING RING, oil pump drive shaft 70 to * - FL, FLH, FLH-80, Classic

O-RING Late 70 to * - FL, FLH, FLH-80, Classic

STUD, 7/16-20 x 1-1/4 lg. 74 to * - FL, FLH, FLH-80, Classic

KEY, gear shaft (3; 2 - Late 75 & later) 70 to * - FL, FLH

PINION GEAR 70 to Early 77 - FL, FLH

NUT, gear shaft 70 to * - FL, FLH, FLH-80, Classic

PINION GEAR, 1.4751-56 pitch dia. (orange) Late 77 to * - FL, FLH, FLH-80, Classic

PINION GEAR, 1.4745-51 pitch dia. (white) Late 77 to * - FL, FLH, FLH-80, Classic

PINION GEAR, 1.4737-45 pitch dia. (yellow) Late 77 to * - FL, FLH, FLH-80, Classic

PINION GEAR, 1.4729-37 pitch dia. (red) Late 77 to * - FL, FLH, FLH-80, Classic

PINION GEAR, 1.4721-29 pitch dia. (blue) Late 77 to * - FL, FLH, FLH-80, Classic

PINION GEAR, 1.4715-21 pitch dia. (green) Late 77 to * - FL, FLH, FLH-80, Classic

PINION GEAR, 1.4710-15 pitch dia. (black) Late 77 to Early 83 - FL, FLH, FLH-80, Classic

CAM AND PINION GEAR SET 70 to * - FL, FLH, FLH-80

BUSHING, oil pump shaft 70 to * - FL, FLH, FLH-80, Classic

SPACER, gear shaft pinion

OIL SCREEN 70 to * - FL, FLH, FLH-80, Classic

OIL SCREEN SPRING 70 to * - FL, FLH, FLH-80, Classic

GEAR COVER | Consists of besides index nos. 10A, 15 & 65:25258-80A GEAR COVER; 25262-80 SPACER

GASKET gear cover

GEAR COVER

FITTING, straight

SPACER 73 to * - FL, FLH, FLH-80, Classic

COVER, breather valve Late 82 to * - FLH-80, Classic

SPACER, gear cover 73 to 79 - FLH-80

THRUST WASHER, breather valve - 0.115 thick 70 to Early 79 - FL, FLH, FLH-80, Classic

Breather valve w/gear - 70 to early 77 FL, FLH, FX

BREATHER VALVE GEAR

THRUST WASHER, breather valve - 0.120 thick 70 to Early 79 - FL, FLH, FLH-80, Classic

THRUST WASHER, breather valve - 0.125 thick 70 to Early 79 - FL, FLH, FLH-80, Classic

THRUST WASHER, breather valve - 0.110 thick 70 to Early 79 - FL, FLH, FLH-80, Classic

THRUST WASHER, breather valve - 0.110 thick (steel) Late 79 to Early 82 - FL, FLH, FLH-80, Classic

THRUST WASHER, breather valve - 0.115 thick (steel) Late 79 to Early 82 - FL, FLH, FLH-80, Classic

THRUST WASHER, breather valve - 0.120 thick (steel) Late 79 to Early 82 - FL, FLH, FLH-80, Classic

THRUST WASHER, breather valve - 0.125 thick (steel) Late 79 to Early 82 - FL, FLH, FLH-80, Classic

THRUST WASHER, breather valve - 0.130 thick (steel) Late 79 to Early 82 - FL, FLH, FLH-80, Classic

THRUST WASHER, breather valve - 0.135 thick (steel) Late 79 to Early 82 - FL, FLH, FLH-80, Classic

THRUST WASHER, breather valve - 0.140 thick (steel) Late 79 to Early 82 - FL, FLH, FLH-80, Classic

THRUST WASHER, breather valve - 0.145 thick (steel) Late 79 to Early 82 - FL, FLH, FLH-80, Classic

THRUST WASHER, breather valve - 0.130 thick (plastic) Late 82 to * - FLH-80, Classic | NOTE: Order plastic washers only with plastic breather valve assemblies. Do not intermix steel and plastic part

THRUST WASHER, breather valve - 0.135 thick (plastic) Late 82 to * - FLH-80, Classic | NOTE: Order plastic washers only with plastic breather valve assemblies. Do not intermix steel and plastic part

THRUST WASHER, breather valve - 0.140 thick (plastic) Late 82 to * - FLH-80, Classic | NOTE: Order plastic washers only with plastic breather valve assemblies. Do not intermix steel and plastic part

THRUST WASHER, breather valve - 0.145 thick (plastic) Late 82 to * - FLH-80, Classic | NOTE: Order plastic washers only with plastic breather valve assemblies. Do not intermix steel and plastic part

THRUST WASHER, breather valve - 0.150 thick (plastic) Late 82 to * - FLH-80, Classic | NOTE: Order plastic washers only with plastic breather valve assemblies. Do not intermix steel and plastic part

THRUST WASHER, breather valve - 0.155 thick (plastic) Late 82 to * - FLH-80, Classic | NOTE: Order plastic washers only with plastic breather valve assemblies. Do not intermix steel and plastic part

THRUST WASHER, breather valve - 0.160 thick (plastic) Late 82 to * - FLH-80, Classic | NOTE: Order plastic washers only with plastic breather valve assemblies. Do not intermix steel and plastic part

THRUST WASHER, breather valve - 0.165 thick (plastic) Late 82 to * - FLH-80, Classic | NOTE: Order plastic washers only with plastic breather valve assemblies. Do not intermix steel and plastic part

CAM GEAR 70 to Early 77 - FLH

Cam Gear - Late 77 to 84 Big Twins

THRUST WASHER, cam gear - 0.05 thick 70 to * - FL, FLH, FLH-80, Classic

THRUST WASHER, cam gear

THRUST WASHER, cam gear - 0.055 thick 70 to * - FL, FLH, FLH-80, Classic

THRUST WASHER, cam gear - 0.060 thick 70 to * - FL, FLH, FLH-80, Classic

THRUST WASHER, cam gear - 0.065 thick 70 to * - FL, FLH, FLH-80, Classic

THRUST WASHER, cam gear - 0.070 thick 70 to * - FL, FLH, FLH-80, Classic

THRUST WASHER, cam gear - 0.075 thick 70 to * - FL, FLH, FLH-80, Classic

THRUST WASHER, cam gear - 0.080 thick 70 to * - FL, FLH, FLH-80, Classic

THRUST WASHER, cam gear - 0.085 thick 70 to * - FL, FLH, FLH-80, Classic

THRUST WASHER, cam gear - 0.090 thick 70 to * - FL, FLH, FLH-80, Classic

THRUST WASHER, cam gear - 0.095 thick 70 to * - FL, FLH, FLH-80, Classic

BUSHING, gear cover 70 to * - FL, FLH, FLH-80, Classic

BUSHING, gear cover pinion shaft

PLUG, oil screen 81 to * - FLH-80, Classic

DRIVE GEAR, oil pump - 25 T 70 to 72 - FL, FLH

DRIVE GEAR, oil pump - 24 T 73 to * - FL, FLH, FLH-80, Classic

DRIVE SHAFT, oil pump 70 to 79 - FL, FLH, FLH-80, Classic

KEY, oil pump gear (2 - gear shaft - 75 & later) 70 to * - FL, FLH, FLH-80, Classic

DRIVE GEAR, oil pump N/A 70 to 72 - FL, FLH

DRIVE GEAR, oil pump 73 to * - FL, FLH, FLH-80, Classic

COVER inner

TIMER COVER, Gold Eagle (accy.) Late 77 to * - FL, FLH, FLH-80, Classic

TIMER COVER, in.No. 1in. 80 to 82 - FL, FLH, FLH-80, Classic

TIMER COVER, in.No. 1in. Late 78 & 79 - FL, FLH, FLH-80, Classic

TIMER COVER 83 to * - FLH-80

TIMER COVER, in.No. 1in. (accy.) N/A Late 77 to 79 - FL, FLH, FLH-80, Classic

LABEL, timer cover N/A 70 to 79 - FL, FLH, FLH-80, Classic

COVER, timer N/A 70 to 79 - FL, FLH, FLH-80, Classic

GASKET, ignition cover

STUD, ignition timer cover Late 72 to 79 - FL, FLH, FLH-80, Classic

STUD, ignition timer cover 80 to * - FL, FLH, FLH-80, Classic

STUD, ignition timer cover N/A Early 70 - FL, FLH

STUD, ignition timer cover Late 70 to Early 72 - FL, FLH

PLUG, crankcase oil line Late 84 to * - FLH-80

CLAMP, circuit breaker wire 70 to 79 - FL, FLH, FLH-80, Classic

Oil line fitting, rocker arm cover-front - 81 to 84 FLH-80, Classic, FX

OIL SEAL 70 to * - FL, FLH, FLH-80, Classic